1991 Fender Stratocaster ‘62 Vintage Reissue ST62-500 Black, 100% Original w/ Case, Japan MIJ Fujigen
$1,599.99
$1,599.99
Shipping calculated at checkout.
Up for sale, a 1991 Fender Stratocaster ‘62 vintage reissue model ST62-500 in excellent, 100% original condition and in perfect working order, complete with a tweed hardshell case. This “Made in Japan” Strat was crafted at the Fujigen factory during the golden age of Fender Japan, produced for the Japanese domestic market and uncommon outside its country of origin.
Weighing 7lbs 14oz, tonewoods include a basswood body, maple neck, and thick slab rosewood fretboard, offering a balanced natural acoustic quality. The bridge position has a sparkling upper midrange-focused cut, the middle pickup has a percussive snap, and the neck position is throaty and warm while still having a peppy snap in the top end. Positions 2 and 4 on the five-way pickup selector switch offer a thinned-out squawk. This Stratocaster ST62-500 benefits from a professional setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
Neck: Maple
Shape: Medium C, measuring .855” at 1st fret, .960” at 12th fret
Fretboard: Rosewood, 7 1/4” radius
Frets: Slender, no wear
Scale Length: 25 1/2”
Nut: 1.650” (42mm), bone
Tuners: Kluson-style, Gotoh
Serialization: K-prefix, “Made in Japan” (1991)
Factory markings: Neck heel pencil dated ‘10-26-91’
Body Specs:
Body: Basswood
Pickups: ST-Vintage single coil x3
Harness: Untouched solder, Japanese pots (September, 1991)
Controls: Volume, Tone x2, five-way pickup selector
Hardware: Synchronized Tremolo, jack cup
Plastics: Three-ply white pickguard, yellowed pickup covers/knobs
The gloss Black finish has a slight indentation on top below the bridge, a small area of finish touchup below the output jack, and light buckle wear on the belly cut, with tiny marks and some light finish scratches in the clear coat on top. The ambered gloss on the neck profile is smooth and clean.
A tweed hardshell case is included.
Weighing 7lbs 14oz, tonewoods include a basswood body, maple neck, and thick slab rosewood fretboard, offering a balanced natural acoustic quality. The bridge position has a sparkling upper midrange-focused cut, the middle pickup has a percussive snap, and the neck position is throaty and warm while still having a peppy snap in the top end. Positions 2 and 4 on the five-way pickup selector switch offer a thinned-out squawk. This Stratocaster ST62-500 benefits from a professional setup here at Mike & Mike’s Guitar Bar with 10-46 strings, low action, and accurate intonation.
Neck Specs:
Neck: Maple
Shape: Medium C, measuring .855” at 1st fret, .960” at 12th fret
Fretboard: Rosewood, 7 1/4” radius
Frets: Slender, no wear
Scale Length: 25 1/2”
Nut: 1.650” (42mm), bone
Tuners: Kluson-style, Gotoh
Serialization: K-prefix, “Made in Japan” (1991)
Factory markings: Neck heel pencil dated ‘10-26-91’
Body Specs:
Body: Basswood
Pickups: ST-Vintage single coil x3
Harness: Untouched solder, Japanese pots (September, 1991)
Controls: Volume, Tone x2, five-way pickup selector
Hardware: Synchronized Tremolo, jack cup
Plastics: Three-ply white pickguard, yellowed pickup covers/knobs
The gloss Black finish has a slight indentation on top below the bridge, a small area of finish touchup below the output jack, and light buckle wear on the belly cut, with tiny marks and some light finish scratches in the clear coat on top. The ambered gloss on the neck profile is smooth and clean.
A tweed hardshell case is included.
