1978 Gibson RD Artist Vintage Electric Bass Guitar Sunburst w/ Moog Electronics, Case
$2,699.99
$2,699.99
Shipping calculated at checkout.
Up for sale, a 1978 Gibson RD Artist bass in perfect working order, complete with a hardshell case. Designed as a collaboration between Gibson and Moog Music (who were both owned by Gibson's parent company Norlin at the time), with input from The Who's John Entwistle, the RD Artist sports an active compression and expansion circuit designed by Moog, available at the flip of a switch. Perhaps best known for its use by bass players such as Justin Meldal-Johnsen (Beck, IMAROBOT, Nine Inch Nails), and Krist Novoselic (Nirvana), the RD bass has a wonderfully aggressive tone that translates the immediacy of the tonewoods and natural sustain of the instrument through the stock Series V humbuckers.
The RD Artist's tonal range is extremely broad, boasting Volume and Tone knobs for each humbucker and a pair of three-way switches, one governing pickup selection and the other engaging the active Moog electronics. With the Moog electronics disengaged, the bass dishes out plenty of midrange grind and low end punch, offering a distinct sound in every pickup position. Neutral in the middle position, the three-way Mode switch has a Bright setting when engaged in the Up position, and it's a fairly extreme tonal shift with tons of treble detail and cut, accentuating the growl of the roundwound strings. In the Down position on the Mode switch, the Compressor/Expander setting is similarly ripping and bright with (unsurprisingly) added compression. With maple construction throughout, this RD Artist weighs 11lbs 6oz, professionally set up here at Mike & Mike's Guitar Bar with 45-100 roundwound strings, comfortable action, and accurate intonation.
Neck Specs:
-Neck: Maple
-Shape: Medium C, measuring .860β at 1st fret, 1.030β at 12th fret
-Fretboard: Ebony, pearl dot inlays
-Frets: Medium jumbo, leveled/crowned, light wear on frets 1-8
-Scale Length: 34 3/8β
-Nut width: 1 5/8β
-Tuners: Clover button, open-gear
-Headstock: Serial has been removed
Body Specs:
-Body: Maple
-Pickups: Series V humbucker x2
-Controls: Volume x2, Treble EQ, Bass EQ, three-way pickup selector, three-way Mode switch
-Hardware: Babicz FCH 3-Point Four String Bass Bridge (upgrade)
-Plastics: Four-ply black pickguard, black speed knobs
The gloss Sunburst finish has a sliver of forearm wear on top and an area of buckle wear on the back. The lower bout edge shows a few finish chips, with small dings and scuffs throughout, and a few small repaired splits adjacent to the input jack. The neck profile is clean, with some shallow dings along its length.
A black tolex hardshell case is included.
The RD Artist's tonal range is extremely broad, boasting Volume and Tone knobs for each humbucker and a pair of three-way switches, one governing pickup selection and the other engaging the active Moog electronics. With the Moog electronics disengaged, the bass dishes out plenty of midrange grind and low end punch, offering a distinct sound in every pickup position. Neutral in the middle position, the three-way Mode switch has a Bright setting when engaged in the Up position, and it's a fairly extreme tonal shift with tons of treble detail and cut, accentuating the growl of the roundwound strings. In the Down position on the Mode switch, the Compressor/Expander setting is similarly ripping and bright with (unsurprisingly) added compression. With maple construction throughout, this RD Artist weighs 11lbs 6oz, professionally set up here at Mike & Mike's Guitar Bar with 45-100 roundwound strings, comfortable action, and accurate intonation.
Neck Specs:
-Neck: Maple
-Shape: Medium C, measuring .860β at 1st fret, 1.030β at 12th fret
-Fretboard: Ebony, pearl dot inlays
-Frets: Medium jumbo, leveled/crowned, light wear on frets 1-8
-Scale Length: 34 3/8β
-Nut width: 1 5/8β
-Tuners: Clover button, open-gear
-Headstock: Serial has been removed
Body Specs:
-Body: Maple
-Pickups: Series V humbucker x2
-Controls: Volume x2, Treble EQ, Bass EQ, three-way pickup selector, three-way Mode switch
-Hardware: Babicz FCH 3-Point Four String Bass Bridge (upgrade)
-Plastics: Four-ply black pickguard, black speed knobs
The gloss Sunburst finish has a sliver of forearm wear on top and an area of buckle wear on the back. The lower bout edge shows a few finish chips, with small dings and scuffs throughout, and a few small repaired splits adjacent to the input jack. The neck profile is clean, with some shallow dings along its length.
A black tolex hardshell case is included.
