Tag Archives: super sonic

REVIEW: Toothsome Tones from Yellowcake’s Furry Burrito

I’m a big fan of cake, let it be known far and wide. All kinds of cake, really: carrot cake, coffee cake, Devil’s Food, German Chocolate, the band Cake, ice cream cake, and especially Red Velvet, which seems to get a lot of hate and is often erroneously thought of as “just chocolate cake that is red.” This is a guitar blog, but I’m tempted to spend the rest of this article explaining exactly why that’s so, so wrong. It’s offensive, really.

For whatever reason, I’ve been in a yellow cake phase for well over a year. I mean, with so many flavors out there, why settle for boring old yellow? There’s just something about that buttery-sweet taste that’s arrested my tastebuds, I really can’t explain it. Except now that I think of it, this craving coincides with the arrival of one of the coolest pedals I’ve ever owned, one which has cemented its place in every incarnation of my guitar and bass rigs since: The Yellowcake Furry Burrito.

Maybe there’s a connection.

img_1827

All-Purpose Fuzz

The Yellowcake Furry Burrito is a fuzz pedal, but not just––the fuzz circuit cascades into an on-board overdrive, reminiscent of the old practice of “stacking” gain stages for maximum saturation, only here it’s in a single unit. In this way the Furry Burrito offers uniquely full-bodied sounds, mating a buttercream Muff-like fuzz and the midrange and clarity of a good overdrive. Even at its most boisterous settings, this pedal never loses definition and potency.

Four knobs adorn the pedal’s pastel enclosure: Gain, Drive, Filter, and Level. Gain and Drive control the amount of fuzz and drive, respectively. Taking turns with each knob shows off the pedal’s unique versatility: favoring the Drive knob gives way to the sweeter side of the Burrito, but Gain is where the decadent fuzz circuit resides. Mixing the two offers a near-endless variety of tones that blur the lines between the two famous effects.

The control labeled “Filter” is your basic variable low-pass which governs the amount of treble frequencies present. However, even at its most extreme settings the pedal retains its personality, never sounding too crystalline or mushy. If you prefer your amps dark like me, you’ll find that the Filter knob can act as a sort of fixer where other fuzz pedals may become too gummy. 

The FAT switch, as you might have guessed, is a two-position selector that offers a boost to the bottom. The ‘down’ position is the pedal’s vanilla setting, and while it’s certainly thinned out compared with the alternative choice, it is by no means washed out or icy. Engaging the switch caramelizes the low end into monstrous bass sounds and warm leads. This pedal loves low frequencies.

The real surprise here is the LED indicator, which doubles as a voltage trim pot. This lets you starve the circuit, introducing all of the sputtery, ripping goodness we all so enjoy in a good fuzz. This, combined with the two flavors of grit, makes the pedal singularly versatile.

Suggested Recipes

At its most polite settings this pedal won’t get you to clean boost territory. What you’re far more likely to find here is a robust drive with some RAT-like edge. What it lacks in subtlety, it more than makes up for in bold sounds as rendered here in my very first encounter with the pedal some sixty-six weeks prior to this post:

These Pinkerton-esque sounds were produced with Drive and Gain both set right around the mid-point into my Fender Excelsior Pro. With my old Jazzmaster, I was surprised by the nearly authentic “The Good Life” sounds that were coming out of it. You know me, all of my gear-tasting begins and ends with Weezer tunes.

The Furry Burrito positively blooms where more chaotic sounds are concerned. Rolling up the Gain and Drive knobs, the pedal becomes a sumptuous wall of thick fuzz, especially with the FAT switch in the ‘up’ position. The ample, peanut butter thick low end fluffs the signal without over overstepping the bounds of good taste (unless you wanted it to). Think Smashing Pumpkins and Dinosaur Jr.

It was this side of the Furry Burrito’s flavor profile that inspired my cover of “Silent Night,” which I recorded early in December of 2016. I ran the Yellowcake into a Strymon Bluesky set for a large hall verb, then ran the stereo signal to my ’65 Fender Bassman piggyback on one side and my ’79 Marshall JMP and mock 8×10” (4×12”) cabinet on the other. When the dirt kicks in at 57 seconds, what you’re hearing is the Yellowcake pedal, those amps, and my old Jazzmaster. I’m really proud of that sound. Have a listen:


Perfect Pairing

It’s also worth mentioning that the Furry Burrito pairs beautifully with other pedals.  When introduced in front of my old standard, the Smallsound/Bigsound FUCK Overdrive, the cascading effect of the creamy fuzz slamming into the FUCK, which added some sweetness and depth while the Furry Burrito happily drenched it in a gooey  ganache of fuzz. When used after my Z.Vex Fuzz Factory, I ended up with an even bigger, wider array of squishier tones. The pairing of the Factory and the Burrito also proved useful for added chaos at the very end of “Silent Night.” You can hear them together at the 1:46 mark, when I go behind the bridge for for the big finish.

This pedal is one of the rare few that’s as at-home on bass as with a guitar, especially with the voltage trimmer rolled back a bit. It also totally nails some of my favorite bass fuzz tones, including Beastie Boys‘ “Sabotage.”

Cooling Rack

img_5394

The Furry Burrito fits in perfectly with Kali’s color-coordinated rig

Having owned this pedal for so long, I should be able to tell you all about its strengths and its weaknesses, but it’s shockingly difficult to come up with criticism.

Yesterday, I showed the pedal off to my good friend Kali Kazoo, one of LA’s most unique and colorful songwriters. Touring the pedal’s various features and settings with Kali, I realized that the LED trimmer, while novel, is easily overlooked. There’s no visual “TURN ME” cue as you’d might expect, no overt declaration of its function. Being a clear, back-lit knob, I also wish for a contrasting indicator so settings are easier to recall. As it stands, my favorite setting for the trimmer is “turned to one side and then back a little bit.

Surely it’s not an exact measurement, but I often adjust according to taste anyway. As far as complaints go, that’s Angel’s Food. Cake jokes.

Have Your Yellowcake and Eat It Too

At $165 street, this pedal is a steal. If you’re on the market for a good, versatile fuzz that can do a lot more than just big, meaty sounds and keeps its composure, definitely keep this pedal in mind. If you find other popular fuzzes too capricious, the Furry Burrito would be an excellent option for you as well. Me, I can’t even think of leaving this pedal off of my board.  You know, I’m glad I don’t have to.

My board from the most recent LeoLeo tour.

My board from the most recent LeoLeo tour.

Tagged , , , , , , , , , , , , , , , , , ,

“I’m Feeling Supersonic”, a Squier Super-Sonic Upgrade/Mod Guide

IMG_6309By Michael James Adams
Recently, a long-held dream of mine came true: finally owning a Vista Series Squier Super-Sonic.

When Squier released the Super-Sonic in the late 1990s, I was immediately smitten with its reverse-offset body and headstock, fast looks and the sparkly blue finished model in particular. I had to have one. Unfortunately, it took until May of 2013 – 17 years after it was released – to make that dream a reality. Why wait so long?

For one, I had never seen one in person as none of the guitar shops in my area were willing to take a gamble on a flashy Squier guitar. I think the look of the thing scared them off, and soon I became caught up in other instruments. I consider myself lucky to have owned quite a few cool pieces in my day, but once a month or so my mind would return to the Super-Sonic, which has become a bit of a collector’s item due to its rarity, and players are seeking them out for their short scale and more familiar control layout as compared to the model’s close relative, the Fender Jaguar.

I finally found one for sale via Craigslist, and this one happened to be in Ohio. The guy was open to shipping and payment via PayPal, and was totally up-front about the broken pickup selector switch, a few scratches and lack of a case. I’ve never been scared off by a guitar having been ‘played in’, as they say, and because I was able to negotiate a better price I had no hesitation in pulling the trigger.

Once the guitar arrived, it was clearly in great shape. Because of the sparkly finish it was really difficult to detect the scars the seller had mentioned, but once I found them they turned out to be mere surface abrasions that easily polished out. Win for me! There was an added strap button and the switch tip had unfortunately snapped-off and was hopelessly lost years ago.

Without hesitation, I set about bringing this treasure up to spec in the hopes I’d be able to play it loud and proud at a forthcoming gig. As Ten would say, “Allons-y!”

Electronics

Even though I’d been pining for a Super-Sonic for years, I was also well aware of their apparent shortcomings. Probably the biggest detractors from these amazing Japanese-made guitars are the pickups: Duncan-designed and produced in South Korea, these pickups are known for flabby, muddy sound and insane amounts of squeal. Once I finally had one in my hands, I knew instantly why so many disliked them. They’d have to go.

IMG_7380-impLucky for me, our good friends at Fastback Custom Guitars here in Seattle had just released their vintage-inspired ’59 Zebras, a set of pickups that aim to replicate that vintage Gibson sound with a slight modern twist. Not only do they sound great, but they also look the part, making them a beautiful addition to the already flashy nature of this guitar. A definite upgrade, and you can read my review of these impressive pickups here.

Next on the docket was replacing that broken pickup selector switch. Truth be told, I would have replaced it anyway, as I have little confidence in plastic-backed Asian market devices, having broken plenty of them in my day. Yes, my heart truly belongs to Switchcraft, and their short model was just the thing I needed for this project. Solidly built and just the right size, the switch also has a satisfying amount of resistance when flipping from pickup to pickup. AllParts also chooses randomly which color of tip to send, so I definitely lucked out with the correct black.

Since we’re being honest, I should admit that I just don’t trust the electronics found in most Japanese-made guitars. I’m not saying that the stock parts are unusable, but knowing how hard I am on guitars it’s always a good idea for me to fully upgrade the wiring harness. Pots, switches, wiring – all of it goes. I used cloth wire, CTS 500K pots and a .022 Orange Drop cap.

If you’re at all familiar with this model, you’ll note that the two controls found on its chrome plate aren’t what you’d expect; instead of the usual vol/tone combo, what we have here is two controls acting as individual volumes for each pickup. A nice thought, but I’m the kind of guy that likes having a tone control and a good capacitor on hand. I set about wiring the guitar in the more familiar 1950s Gibson tradition, for which I always use a 1950’s wiring diagram, which allows the pickups and tone cap to work together more transparently.

Hardware

I didn’t go quite this far because a) I’m quite content with the bridge as-as and b) I’m only willing to indulge my obsessive-compulsive upgrades to a certain extent. Even so, the original bridge and hardware aren’t bad at all. In fact, they’re quite good.

The original tuners work brilliantly, but if I were in the market for replacements I’d be looking to my favorite brand Tone Pros. Their Kluson-style machines are made with higher quality materials than the originals, and are super authentic in look but precision-machined for modern reliability. Wonderful stuff, there.

As for the bridge, it’s a great unit that stays in tune nicely. I could see myself going for a Callaham bridge at some point, but I’m not necessarily looking for true vintage Strat tones, you know? Man, what I’d really like to do is pull the trem, fill the cavity and route the body for a Jazzmaster/Jaguar vibrato and a Mastery. I won’t, but that would be amazing.

Cosmetics

Flashy as she was, there were a few visual detractors that I couldn’t simply gloss over; I’m a picky guy, I guess.

For one, the original knobs were a good bit smaller than standard Jaguar knobs, and of course won’t fit on the US pots I dropped in the guitar, so they had to go. I ordered some genuine Fender replacement knobs, which looked very, very new when they arrived. Given that my guitar had been played hard and had tarnished hardware, it didn’t make aesthetic sense to have bright, shiny knobs on the control plate. So, I set about the task of lightly aging them to match, using Other Mike’s ’63 Jazz Bass as my template.

IMG_6652IMG_6650

Using my coarse-grit polishing pads I was able to de-gloss the knobs sufficiently, and after that I sprayed some lightly tinted clear coat on them to soften the look of the indicator. After dirtying them up a bit, I was left with knobs that had the perfect well-worn attire that belied their age.

The other eyesore about the guitar was that the previous owner had added a strap button on the upper bout, a common mod for these guitars. If you didn’t know, the Super-Sonic has its upper strap button on the neck plate, utilizing a longer anchor screw to accommodate the button itself. Some people really don’t like this – I didn’t at first! – but having gotten used to the way attaching the strap to the neck plate button shifts the guitar forward I couldn’t see myself using the other ever again. So, I set about filling in the hole and making it as invisible as possible.

IMG_6795I doweled the hole with some scrap wood we had laying around the shop, and after the glue was dry my aim was to create a perfectly-shaped surface for whatever new finish I would lay on top. Because the addition of the new strap button had chewed out some extra wood, I had to use wood putty to fill in the missing bits. Simple enough!

After allowing the putty to cure for a few days, I was stuck wondering exactly how I was going to recreate the look of blue sparkle finish in such a small area. If it were a solid color or even a burst, that would be a far easier task; laying down sparkles in a convincing way would be tricky, especially when it comes to the way the original finish reflected light…

Then an idea struck me: “What about glitter glue?”, I wondered to myself. Soon enough, I found myself on the hunt for the right shade of glitter at Michael’s, which was appropriate. I stumbled upon the Recollections brand and found exactly what I was looking for: Peacock Blue.

That’s a nice match, innit? It’s even better out of the bottle. Michael’s only carried the two smallest flake sizes in their stores, so the next one up would have been perfect. But hey, I nailed the color, so why complain?

It took a few days to get this right, honestly; laying down layer after layer of glue and waiting for it to reduce as it dried, never quite being able to predict how the flakes would lay. Very tedious. After I achieved the right about of sparkle density, I covered it up with super glue, which polished to a high gloss after it dried. I think it came out pretty well, considering. I mean, it’s not an exact match, but it’s pretty damn close. And now I don’t have an extra strap button hanging out, nor do I have to deal with an open wound on my beloved instrument.

I forgot to upload this shot in my initial post, but better late than never. Like I said, I'm super proud of this!

I forgot to upload this shot in my initial post, but better late than never.

Like I said, I’m really proud of how this turned out. Up close, you can definitely see the scar, but from a few paces away, the mind simply glosses over the offending spot, with the sparkly finish blending together in a pleasing way. Success!

The Final Product

Totally stoked.

Actually, I just noticed that the added strap button is still installed in this picture. I’ll replace it later. Grr/argh.

IMG_6642-imp

– MJA

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Getting to Know Mike & Mike’s Guitar Bar

Our good friends at Orbilite Productions came to the shop a month or so back to interview us for what will hopefully become a series of videos detailing just what it is that makes Mike & Mike’s so darn special.

We’re really proud of our first foray into visual media, and we think it came out great! We’re hoping that it shows our personality and helps put a face on the internet presence we’ve been trying to build. Get to know us! Come one, come all!

 

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Fastback ’59 Zebras: Show Ponies or Thoroughbreds? (Also, Horse Jokes)

IMG_7380-imp

By Michael James Adams
Seattle-based hot-rod guitar company Fastback is Fastback at it again with their newly-released pickup set: The Fastback ’59 Zebras. Manufactured by hand with care, these pickups claim to be modeled after the fabled P.A.F. pickups found on our favorite vintage bursts, but do they live up to the hype? Let’s find out!

A Horse of a Different Color

The Fastback ’59 Zebra pickups are hand-wound at Fastback’s Seattle HQ and spec’d out like the original PAFs we’re all so fond of. Visually, this set couldn’t look more right; the cream bobbins are just the right color, neither looking too yellow or too brown as aged parts so often do. Customers can expect a choice between AlNiCo 2 and 5 magnets for different tonal variations, with the 2 magnets exhibiting softer, spongier highs and lows with round mids than their ‘three more’ counterparts. The pickups come with a heavy wax bath to combat microphonics – breaking with true vintage tradition to the joy of most people – and single braid wire for easy installation.

Our set was wound slightly hotter than the measurements listed on the website (not that I’m complaining!) with the bridge measuring in at 8.4K and the neck at 7.6K. Installation was a breeze, and within no time I was slinging hot licks all over the place. Or whatever people do with guitars these days.

With these pickups loaded into my recently-acquired ’97 Squier Vista Super-Sonic, the difference in sonic fidelity was immediately identifiable. Of course the Zebras were a marked improvement over the stock Korean ‘buckers, but being a guitar tech I’m no stranger to vintage PAFs and I must say I was impressed. Fastback’s really hit the nail on the head here, folks.

Black and White and Cred All Over

The neck pickup had all of the airy, vocal midrange I expected from a pickup claiming to be a PAF, but few of them ever really get all the way there. The lows were pronounced but not overbearing, and the highs were sweet and supple, with a warmth and body all their own. Clean or dirty, this pickup retained the clarity and note definition associated with classic units. With overdrive, I was enveloped in heavenly fat tone.* Really a superb pickup in every way.

The bridge unit absolutely blew me away; creamy, chunky drive that stayed tight enough to appease my modern sensibilities, but was in no way sterile or shrill. The midrange was warm yet distinct, bringing to mind my favorite Jimmy Page sounds from How the West Was Won. Highs were stinging but round, while the lows were well-defined and present, but not as much as one might expect given current “PAF” offerings. Let me explain:

IMG_7381-imp

Our test unit was 8.4K, slightly hotter than the one pictured above.

Though not as ample as I expected, the lows have a slightly different EQ curve, which seems to sacrifice some of the really round, fat low-lows in favor of a slightly higher bass frequency center, which means it never gets woofy or muddy. The E and A strings particularly had a very pleasant midrange kick, but were resplendent with a softer, woody overtone that immediately harkened back to the golden era of single-cut solid body guitars.

Again, the Jimmy Page comparison is apt here, because while his tone in HTWWW is freaking huge, I wouldn’t even begin to describe it as being as big and spectrum-killing as so many of our modern guitar ‘heroes’ might have you believe. No, Page’s tone is focused and cutting, neither overly bright or bassy. In a word, perfect – same as these pickups. I imagine the lows would be more pronounced in a more traditional mahogany body/maple top instrument, but I really dig the sound.

When used in tandem, these little beasts really come alive! The vocal qualities I mentioned earlier are magnified, with that quintessential open ‘ah’ vowel tone cutting through any dense mix. Literally anything I played with this selection sounded good, and that’s saying a lot. From legato minor-key runs to all-out, cacophonous freak out sessions, everything was gloriously tuneful.

I didn’t mention how well these pickups respond to tone knob variations. Even with a small twist from 10 to 8, the pickups warmed up beautifully, shifting the focus from brilliance to the woodier qualities we all associate with mahogany guitars. Thing is, this guitar isn’t mahogany, it’s basswood. Sure, the Super-Sonic isn’t the traditional guitar we’re all familiar with, but all of the warmth and lively sound I’d expect from a Les Paul was at my fingertips in a decidedly Fender package. Drop these pickups in a Les Paul, and I guarantee you’ll be thrilled.

Yay or Neigh?

Overall, I couldn’t be happier with these pickups. They’re every bit as magical as some of the original units I’ve played, with just a touch of modern wizardry thrown in. Too often, major pickup manufactures seem to be following in the current business model of most amp manufacturers, where doing absolutely everything comes before simplicity and good tone. We’re often left with amps that do everything averagely, with obscene amounts of high and low end which ultimately translates into a lackluster playing experience.

So you can understand why I really appreciate that Fastback has created a pickup that isn’t super hi-fi and doesn’t try to cover the breadth of the sonic spectrum. Instead of making a pickup that has huge amounts of earth-shattering low end and enough highs to blind a bat, it seems like Fastback tailor-made a set to suit full band situations with a focused, brilliant tone that cuts as much as it grooves. Undeniably fun, and easy on the wallet too!

Equine jokes.

Fastback ’59 Zebras
$80 each/$150 per set
Available direct or via Mike & Mike’s Guitar Bar

IMG_6641-imp

*Not to be confused with heavenly Fatone, which would be soooo dreamy

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
%d bloggers like this: