Tag Archives: squier

Squier-O-Practor: A Misaligned Neck Could be Painful

When you think of a decent guitar setup, what comes to mind? Lowering action, correcting intonation, maybe giving the truss rod a good turn? They’re all components of a good setup for sure, but is that really the long and short of it? No, there’s more to it than that!

I’ve always believed that a thorough setup has to go beyond just the basics. You’ve got to take into account the whole instrument, from dressing the nut slots for the player’s preferred string gauge to even giving the tuners a quick twist just to make sure they aren’t sticking. De-gunking a fretboard, polishing frets, spraying out dirty pots, and even removing some problematic rust are often essential to making a guitar fully playable as well as functional.

Case in point, something I’ve often seen slip past the sensors is neck alignment, where the neck is tilted on the body in favor of one E string or the other. With a misaligned neck, the strings closest to the edge of the board are prone to slipping off and intonation can suffer greatly. Almost every bolt-on guitar on the market exhibits this issue in some form or another, which is commonly caused by the extra bit of play in the neck pocket that comes with mass-production. It’s an issue found on high-dollar guitars too, not just imports and affordable models like the guitar I’ll use below as an example.

Have a look at this Squier J.Mascis:

Misalignment on the left, corrected on the right

When I got my hands on this one, the high E had a tendency to slip off the fret ends, and intonation on the plain strings was nearly impossible, especially with the reduced saddle travel of the TOM bridge installed on the model. This kind of thing can even muck with string bending, as the string can be choked off as it crosses the fretboard at an angle. Also note that the strings do not line up with the pole pieces of the neck pickup!

Luckily, this is an easy thing to correct. The most basic solution is to simply pull the neck back into place. In this case, all that was needed was holding the guitar with the upper bout against my body and giving the neck a quick pull towards me, then tightening the neck bolts to ensure it stays put.

Fig. 1

In more extreme cases, shimming around the perimeter of the neck pocket may be necessary for a tight fit. Where there’s only a little extra space, I’ll insert a shim where the neck touches the pocket when tilted. Using this J.Mascis as an example, this could mean shimming the treble side of the heel and along the bass side of the pocket to keep it in place. [See Fig. 1]

As for materials, wood veneer, cut-up baseball cards, or even discarded picks made to fit will work just fine if you’re more of a DIY fan. In the case of an oversized neck pocket, like those often found on some CBS Fender guitars, a qualified tech or luthier should be able to add material if necessary, even going so far as to add a shaped, painted shim along the bass side of the neck. Really, whatever keeps things stable is good enough in most cases.

Next time you’re cleaning or restringing your guitar, have a look at the neck and check to make sure it is properly aligned. If not, you could be missing out on a better setup and truer intonation as a result. All it takes is a little attention and experimentation to correct an issue like this one.

Tagged , , , , , , , , , , , , , , ,

REVIEW: Toothsome Tones from Yellowcake’s Furry Burrito

I’m a big fan of cake, let it be known far and wide. All kinds of cake, really: carrot cake, coffee cake, Devil’s Food, German Chocolate, the band Cake, ice cream cake, and especially Red Velvet, which seems to get a lot of hate and is often erroneously thought of as “just chocolate cake that is red.” This is a guitar blog, but I’m tempted to spend the rest of this article explaining exactly why that’s so, so wrong. It’s offensive, really.

For whatever reason, I’ve been in a yellow cake phase for well over a year. I mean, with so many flavors out there, why settle for boring old yellow? There’s just something about that buttery-sweet taste that’s arrested my tastebuds, I really can’t explain it. Except now that I think of it, this craving coincides with the arrival of one of the coolest pedals I’ve ever owned, one which has cemented its place in every incarnation of my guitar and bass rigs since: The Yellowcake Furry Burrito.

Maybe there’s a connection.

img_1827

All-Purpose Fuzz

The Yellowcake Furry Burrito is a fuzz pedal, but not just––the fuzz circuit cascades into an on-board overdrive, reminiscent of the old practice of “stacking” gain stages for maximum saturation, only here it’s in a single unit. In this way the Furry Burrito offers uniquely full-bodied sounds, mating a buttercream Muff-like fuzz and the midrange and clarity of a good overdrive. Even at its most boisterous settings, this pedal never loses definition and potency.

Four knobs adorn the pedal’s pastel enclosure: Gain, Drive, Filter, and Level. Gain and Drive control the amount of fuzz and drive, respectively. Taking turns with each knob shows off the pedal’s unique versatility: favoring the Drive knob gives way to the sweeter side of the Burrito, but Gain is where the decadent fuzz circuit resides. Mixing the two offers a near-endless variety of tones that blur the lines between the two famous effects.

The control labeled “Filter” is your basic variable low-pass which governs the amount of treble frequencies present. However, even at its most extreme settings the pedal retains its personality, never sounding too crystalline or mushy. If you prefer your amps dark like me, you’ll find that the Filter knob can act as a sort of fixer where other fuzz pedals may become too gummy. 

The FAT switch, as you might have guessed, is a two-position selector that offers a boost to the bottom. The ‘down’ position is the pedal’s vanilla setting, and while it’s certainly thinned out compared with the alternative choice, it is by no means washed out or icy. Engaging the switch caramelizes the low end into monstrous bass sounds and warm leads. This pedal loves low frequencies.

The real surprise here is the LED indicator, which doubles as a voltage trim pot. This lets you starve the circuit, introducing all of the sputtery, ripping goodness we all so enjoy in a good fuzz. This, combined with the two flavors of grit, makes the pedal singularly versatile.

Suggested Recipes

At its most polite settings this pedal won’t get you to clean boost territory. What you’re far more likely to find here is a robust drive with some RAT-like edge. What it lacks in subtlety, it more than makes up for in bold sounds as rendered here in my very first encounter with the pedal some sixty-six weeks prior to this post:

These Pinkerton-esque sounds were produced with Drive and Gain both set right around the mid-point into my Fender Excelsior Pro. With my old Jazzmaster, I was surprised by the nearly authentic “The Good Life” sounds that were coming out of it. You know me, all of my gear-tasting begins and ends with Weezer tunes.

The Furry Burrito positively blooms where more chaotic sounds are concerned. Rolling up the Gain and Drive knobs, the pedal becomes a sumptuous wall of thick fuzz, especially with the FAT switch in the ‘up’ position. The ample, peanut butter thick low end fluffs the signal without over overstepping the bounds of good taste (unless you wanted it to). Think Smashing Pumpkins and Dinosaur Jr.

It was this side of the Furry Burrito’s flavor profile that inspired my cover of “Silent Night,” which I recorded early in December of 2016. I ran the Yellowcake into a Strymon Bluesky set for a large hall verb, then ran the stereo signal to my ’65 Fender Bassman piggyback on one side and my ’79 Marshall JMP and mock 8×10” (4×12”) cabinet on the other. When the dirt kicks in at 57 seconds, what you’re hearing is the Yellowcake pedal, those amps, and my old Jazzmaster. I’m really proud of that sound. Have a listen:


Perfect Pairing

It’s also worth mentioning that the Furry Burrito pairs beautifully with other pedals.  When introduced in front of my old standard, the Smallsound/Bigsound FUCK Overdrive, the cascading effect of the creamy fuzz slamming into the FUCK, which added some sweetness and depth while the Furry Burrito happily drenched it in a gooey  ganache of fuzz. When used after my Z.Vex Fuzz Factory, I ended up with an even bigger, wider array of squishier tones. The pairing of the Factory and the Burrito also proved useful for added chaos at the very end of “Silent Night.” You can hear them together at the 1:46 mark, when I go behind the bridge for for the big finish.

This pedal is one of the rare few that’s as at-home on bass as with a guitar, especially with the voltage trimmer rolled back a bit. It also totally nails some of my favorite bass fuzz tones, including Beastie Boys‘ “Sabotage.”

Cooling Rack

img_5394

The Furry Burrito fits in perfectly with Kali’s color-coordinated rig

Having owned this pedal for so long, I should be able to tell you all about its strengths and its weaknesses, but it’s shockingly difficult to come up with criticism.

Yesterday, I showed the pedal off to my good friend Kali Kazoo, one of LA’s most unique and colorful songwriters. Touring the pedal’s various features and settings with Kali, I realized that the LED trimmer, while novel, is easily overlooked. There’s no visual “TURN ME” cue as you’d might expect, no overt declaration of its function. Being a clear, back-lit knob, I also wish for a contrasting indicator so settings are easier to recall. As it stands, my favorite setting for the trimmer is “turned to one side and then back a little bit.

Surely it’s not an exact measurement, but I often adjust according to taste anyway. As far as complaints go, that’s Angel’s Food. Cake jokes.

Have Your Yellowcake and Eat It Too

At $165 street, this pedal is a steal. If you’re on the market for a good, versatile fuzz that can do a lot more than just big, meaty sounds and keeps its composure, definitely keep this pedal in mind. If you find other popular fuzzes too capricious, the Furry Burrito would be an excellent option for you as well. Me, I can’t even think of leaving this pedal off of my board.  You know, I’m glad I don’t have to.

My board from the most recent LeoLeo tour.

My board from the most recent LeoLeo tour.

Tagged , , , , , , , , , , , , , , , , , ,

The Squier Vintage Modified Bass VI: a 100% Pun-Free Upgrade Guide

img_7827

My Squier VI lounging with Paul Frank’s amazing Custom Shop model, strung with Gabriel Tenorio strings

While Fender’s Jazzmaster and Jaguar seem more popular than ever, the Bass VI still seems mysterious, or at the very least, under-appreciated. Players seem confused by its mere presence in the catalog: Is it a bass? Is it a guitar? Is it a baritone?

Let’s clear up the confusion right now: The Bass VI is a bass guitar in the strictest sense. Tuned E to E a full octave lower than a standard guitar, the VI is an incredibly versatile instrument that’s as well-suited for familiar chord shapes as it is for punchy bass lines.

Right now, the easiest way to get into a VI is the Squier Vintage Modified model. Fundamentally a great instrument, the Squier VI ticks all of the right boxes for me: it has Jaguar-style pickups and the all-important fourth Bass Cut switch, it’s affordable, and it’s damn fun to play. We’re still talking about an import model, so if you pick one up and find it lacking, I’m here to provide a handy upgrade guide to the “ba-VI” of “VI-sessfully” upping your Squier’s “VI appeal” into a machine for making “mu-VI.” (My deepest apologies for how poorly those puns worked.)

The first mod I’m going to suggest can hardly be called a mod at all, but believe you me, it’s crucial.

STRINGS

Far and away, the most common complaint with current Bass VI models is that the low E string lacks tension. You’ll hear it described as “floppy” or “sloppy,” and those adjectives sum it up nicely. It feels unbalanced and just can’t stand up to aggressive picking.

The problem with your Bass VI’s low E is thanks to a too-light gauge of string. When Fender released the Bass VI in 1961, the standard set was made up of strings gauged .026”-.095”, and that .095” is key here. At some point in the recent past, the low E string changed to .084” which is woefully under-built for the task. A .095” E is going to feel taut, stable, and will gleefully accept heavy attack, whereas the lighter string ends up feeling, well, just as described in the paragraph above.

In my view, the most essential mod you can perform on your VI is installing a heavier, more balanced string set. Even without upgrading the bridge or swapping pickups, this very simple and easily overlooked tweak can tighten up the whole instrument and bring back the low end that’s so sorely missing with the stock strings.

Because this information doesn’t seem to be collected anywhere, here’s a handy shortlist of string makers that offer a good set of VI strings with adequately heavy E string, which I’ll update as I stumble upon them. The only set Fender currently offers is gauged .024″-.084″, sadly.

La Bella (Flats and Rounds)
Kalium (Rounds, tons of options)
Gabriel Tenorio String Company (Rounds and Gabriel’s new Ground Wounds)

Or, if you want a genuine set from the 1960s

BRIDGE

A '62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

An original ’62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

If you ever have a chance to inspect a vintage Bass VI, you’ll notice that the original bridge is much wider than the one found on most reissues, which is just a standard offset bridge slapped on likely due to the costs of tooling-up for such a niche item. That original 1” width is a big part of the Bass VI functionality puzzle, which translates to more flexibility when it comes to intonation. Original examples have nearly twice the saddle travel as the current part, and with the Bass VI’s 30” scale, every little bit is precious.

The stock Squier VI bridge

The stock Squier VI bridge

The bridge found on the Squier Bass VI is essentially the same as the other VM offsets, save for the adjustable Mustang-style saddles, which have deep grooves and the ability to set the radius of the strings to match the fretboard. It does, however, have a propensity to rattle around so much that even correct offset setup techniques may not quell it. (See my Demystifying series for more info)

What to do? Track down an original bridge from the 1960s or 1970s? Nah, Staytrem’s got you covered with their fantastic and appropriately wide Bass VI bridge. If you’re looking for a stable bridge that’ll intonate for sure, this is the way to go. I have a Mastery on my personal Squier, and while it does intonate perfectly for me, your mileage may vary depending on string gauge and type as well as setup.

TREM

img_8743As I mentioned in my recent article on the J.Mascis model, if you’re planning on using the vibrato you really should upgrade this part. Import vibratos are made of inferior metals and often have manufacturing flaws that render them less stable than their US-made counterparts.

A great solution here is obtaining a Fender AVRI/AV65 vibrato, especially if you’re on a budget. I’ve chosen the Mastery Vibrato for my own specifically because of the heavy-duty spring Mastery uses, which replicates the sturdier feel of early 1960s units and really stands up to the extra tension of those thick strings.

 

NUT

As you might expect, the nut work on these instruments is passable, but not great. The soft plastic used wears easily, and the slots are often too tight even for the string gauge used at the factory. I’ve also seen a number of them with poor string spacing, but hey, I don’t expect perfection on a sub-$500 instrument.

I highly recommend having the nut replaced by a competent tech in the material of your choice; my preference is bone. And for those of you that use the vibrato, a properly-cut nut is your best defense against tuning issues.

ELECTRONICS

The electronics in the Squier Vintage Modified series are, understandably, on the cheap side of things. I’ve seen and heard of a number of VMs that had wiring issues or faulty parts right out of the box, so if you’re going to be using this instrument heavily I would insist that you have the instrument rewired with higher quality pots, switches, capacitors, and even replace the jack while you’re at it. Not only will you end up with an instrument you can really trust, you’ll also have better sound as a result.

Look to CTS, Bourns, or my good friends at Emerson Custom for pots, Switchcraft for the jack and switches, and any number of options exist for capacitors. Most of these parts can be found via AllParts or Angela.

Note: US parts will require enlarged holes on the volume-tone control plate.


PICKUPS

While I confess that you can get by with the Squier in its stock configuration, let’s be honest: there are better pickups out there. They’re a little trebly, a bit noisy, and too weak on output to keep up with other basses. It’s well worth your time to explore the myriad pickup options that exist in today’s market, but where to start?

Star Trek stickers optional, of course

Star Trek stickers optional, of course

In my mind, Curtis Novak has his finger firmly on the pulse of offset guitars’ unique capabilities, and he’s the first person I bring up when a customer has a specific sound in their head. From traditional sounds to obscure designs stuffed into familiar covers, Curtis excels at wringing every last drop of tone from your instrument.

For Bass VI, he offers both the early ’61-’62 Jack Bruce-style pickups and the Jaguar-style pickups that came as standard on the model from 1962 onward. However, if you’re looking for something different, I’m sure Curtis could wind up a trio of his Jaguar-sized Lipsticks, some unique Gold Foils, or even something humbucking if you’re that kind.

Another good option would be the fantastic pickups made by our friend Jaime of At The Creamery. He offers a VI set with much higher output than the stock pickups, and with custom options if desired. Jaime does exceptional work!

On my personal VI, I started out by building a set out of three Fender AV65 Jaguar pickups, which I really like. They’re affordable and great-sounding pickups for the price, but ultimately, a little too bright for my tastes. If you need a good Tic-Tac sound, this would be a great way to go. If you create a set out of three separate pickups, do pay attention to output in each position as well as polarity to make sure they all play well together.

Currently, my VI is loaded with a set wound by our good friends a Lollar Pickups, which have a bump in midrange and output, and they really keep up with my other instruments no matter the setting. Plenty of bass on tap and clarity through any amp. I’m a huge fan of Lollar Pickups.

TUNERS

Prepare to be amazed: there’s no good reason to toss these. The Kluson-style tuners you find stock on the Squier VI are great. On the many examples I’ve had across my bench, I have never found them to be problematic. Keep them.

LINE VI

When Squier introduced their take on the VI, I was immediately excited. At the time, the VI wasn’t an instrument I was keen to spend a lot of money on, simply because I didn’t think I’d be using it heavily. Squier made that sound accessible and did so with a lot of bang for the buck. When you mod this instrument, it isn’t so much a lipstick-on-a-pig scenario, you’re genuinely taking a good instrument and making it better.

My VI and '73 Precision, just after we got back from tour.

My VI and ’73 Precision, just after we got back from tour.

To that point, I recently joined my good friends Vanessa and Sarah, a duo better known as Leo Leo. The LA-based contemplative rock-pop outfit plays complex, beautiful music that’s as energetic as it is challenging; they are one of my favorite bands. When they asked me to tour with them on bass, I have to admit that I was overjoyed and overwhelmed, especially with just a week to learn ten songs. It was a lot of work, but I’m so proud of the noise we made together at those shows.

At the center of my bass sound: my trusty Squier VI. I plugged into a borrowed Salvage Custom board (thank you, Gabriel!) populated with pedal necessities run through a mini SVT. Night after night, that thing performed beautifully and never let me down. Even as we rehearsed, it became clear that the VI was the sound. It proved to be such a bruiser that next time, I may leave my ’73 Precision Bass at home.

Each time I took it out of its case, I was immediately greeted with questions from perplexed onlookers that wondered about my weird bass. I showed it off proudly and handed it over to person after person, none of whom could believe what they were playing was a lowly Squier. There was only one occasion before a show where a churlish bassist chided me for playing––and I quote––a “piece of shit.”

I’m happy to say that I proved him wrong that night. I’m proud to play my Squier.

Here's how that Squier looked the day I recieved it. (Thanks, Nate!)

Here’s how that Squier looked the day I recieved it. (Thanks, Nate!) See below for a post-mod comparison.

This one's getting a TON of use in the @leoleoband set for the tour that starts—holy shit—tomorrow. Now, the weight of this Squier Bass VI never bothered me until we started this hours-long rehearsal process, but at the end of the night my back is screaming at me for relief. I think it may be time to look into a real '60s VI refin or something, that is of course assuming that the band wants to keep me! 😁 I also wish it were brightly-colored, but eh, such is life. Upgrades: -Lollar pickups -Fenderparts mint guard -Mastery Bridge + Vibrato (thanks Woody!) -upgraded wiring -La Bella Deep Talkin' Flats -Matching headstock #guitar #bass #bassvi #leoleo #tour #masatour #makeamericashakeagain #squier #fender #offsetguitars #lollarpickups #masterybridge #fenderparts

A post shared by Michael James Adams (@puisheen) on

Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,

Upgrading a Squier J. Mascis Jazzmaster

FullSizeRender_1As you can imagine, I get asked about mods all the time. Recently, my new friend Brent brought his Squier J. Mascis model to me to hear my impressions of it and the many potential upgrades he was looking to have done. As-is, the JMJM is such a good guitar that many players don’t see the need for new pickups or hardware, but given the cheap price he paid and his needs, it totally made sense to do the work.

As I said before, the JMJM is a pretty cool guitar for the money. The neck feels great in your hand, the stock pickups are alright, and it has all of the right electronic appointments a Jazzmaster should have. Still, there’s room for improvement. Let’s jump in, shall we?

Tuners: Actually, these are good enough that I don’t see the need for a swap. As long as know how to string a slotted post correctly (string goes in the hole, 3-5 wraps) they work just fine. Great, actually. Even on my Squier VI!

Pickups: The stock units are pretty decent, but they are indeed P90s instead of Jazzmaster pickups, with big bar magnets and adjustable poles, with a tall coil that’s wound hot. If you want a real Jazzmaster sound, you’re not going to get it from those. Plus, as far as P90s go, I just feel there are better ones out there. I recommend a swap.

Electronics: On this particular instrument, I didn’t totally rewire the guitar. Generally, the one area where the current Squier builds fall short is the dependability of the electronics, which often develop shorts due to sloppy wiring or inferior parts. Instead, I went through and checked every wire and re-flowed some particularly bad connections. I do, however, recommend gutting the electronics and starting fresh with better components.

AOM/TOM Bridge: If you’re familiar with us, you’ll know that the AOM/TOM is the bridge we least recommend for offset guitars, both for sound and setup. Adjust-O-Matic/Tune-O-Matic bridges generally aren’t the correct radius for the most common Fender necks (7.25” and 9.5”) and even with heavy re-slotting of the saddles, it’s not always possible to totally correct that. As a result, the E strings will always feel more stiff than the others.

Additionally, even these bridges don’t always address the most common complaints with the original style bridges: buzzing and stability. This bridge already had some pretty nasty buzzing going on, which was mostly cured by re-seating the saddles. A shallow slot on the low E saddle meant that string impulsively jumped out with heavy picking as well. 

I recommend a change here, but obviously, your mileage will vary.

A Mastery bridge is almost always my first pick here, which does indeed require pulling the old AOM/TOM inserts, filling the holes, then re-drilling. Staytrem also makes a drop-in thimble replacement for these, so do keep that in mind if you’re looking for something less, well, surgical. They also used to make a drop-in replacement, but I can’t seem to find it on their site. I may be interneting improperly.

The Vibrato: I won’t totally rehash my arguments from our prior blog post on the quality issues of import vibrato units, but suffice it to say, if you’re a heavy trem user––hell, even a pedestrian––you should consider an upgrade here. Tuning stability is key, and the sloppy fit of the internals on these can be a nightmare.

In this case, we went with an American Vintage Reissue trem from eBay user trickedoutguitar, which came with the correct AVRI arm with the ever-so-lovely, gentle bend. Mastery also makes a delightful trem of their own, which I recommend highly for truly intense users.

IMG_8439So, when we finished our assessment meeting, I made my list of recommendations known. With Duncan Antiquity Is, a Mastery M1 kit, and an AVRI trem, I felt we’d pretty much covered everything. Obviously, the Mastery and pickups can be a significant investment for such an affordable guitar, but Brent wanted a guitar that would meet his needs without having to think about it ever again. Good call, says I.

After doing all of that and a proper setup by Yours Truly, I really believe we made a good instrument great. The difference in tone, unplugged and amplified, was immediately apparent. Whereas the guitar sounded pretty good plugged-in but was rather dead acoustically, the superior fit of the Mastery bridge and thimbles really made the thing come alive. And the trem? Smooth and immediate, and of course, stable as hell.

When I’m asked about my favorite Jazzmaster pickups, I always recommend Lollar, Novak, and Duncan Antiquity Is, the latter of which I feel does an excellent job of approximating the sound and response a 60+ year old black-bobbin pickup. In the case of this JMJM, we ended up with a brand new guitar, the sound of which belied its youth. Really a stunning pickup set. It has so much of the warmth and midrange complexity that’s associated with the best old pickups, woody and natural as can be.

IMG_8523

Brent’s finished Squier J. Mascis pictured with Artoo and Pancake

We came so close to that sound that I decided to do a comparison video of the J.Mascis  Squier up against my 1961 Jazzmaster “Pancake”, which is the greatest guitar I’ve ever played. This was all rather last minute and I didn’t yet have a proper microphone, but the iPhone did a good job showing some of the more overt differences between them. I even threw in “Artoo”, my 2007 Thin Skin with Lollars for fun. Check the video below!

In the end, Brent was absolutely blown away by his guitar, and so was I.

Tagged , , , , , , , , , , , , , , , , , , , , , , , ,

“I’m Feeling Supersonic”, a Squier Super-Sonic Upgrade/Mod Guide

IMG_6309By Michael James Adams
Recently, a long-held dream of mine came true: finally owning a Vista Series Squier Super-Sonic.

When Squier released the Super-Sonic in the late 1990s, I was immediately smitten with its reverse-offset body and headstock, fast looks and the sparkly blue finished model in particular. I had to have one. Unfortunately, it took until May of 2013 – 17 years after it was released – to make that dream a reality. Why wait so long?

For one, I had never seen one in person as none of the guitar shops in my area were willing to take a gamble on a flashy Squier guitar. I think the look of the thing scared them off, and soon I became caught up in other instruments. I consider myself lucky to have owned quite a few cool pieces in my day, but once a month or so my mind would return to the Super-Sonic, which has become a bit of a collector’s item due to its rarity, and players are seeking them out for their short scale and more familiar control layout as compared to the model’s close relative, the Fender Jaguar.

I finally found one for sale via Craigslist, and this one happened to be in Ohio. The guy was open to shipping and payment via PayPal, and was totally up-front about the broken pickup selector switch, a few scratches and lack of a case. I’ve never been scared off by a guitar having been ‘played in’, as they say, and because I was able to negotiate a better price I had no hesitation in pulling the trigger.

Once the guitar arrived, it was clearly in great shape. Because of the sparkly finish it was really difficult to detect the scars the seller had mentioned, but once I found them they turned out to be mere surface abrasions that easily polished out. Win for me! There was an added strap button and the switch tip had unfortunately snapped-off and was hopelessly lost years ago.

Without hesitation, I set about bringing this treasure up to spec in the hopes I’d be able to play it loud and proud at a forthcoming gig. As Ten would say, “Allons-y!”

Electronics

Even though I’d been pining for a Super-Sonic for years, I was also well aware of their apparent shortcomings. Probably the biggest detractors from these amazing Japanese-made guitars are the pickups: Duncan-designed and produced in South Korea, these pickups are known for flabby, muddy sound and insane amounts of squeal. Once I finally had one in my hands, I knew instantly why so many disliked them. They’d have to go.

IMG_7380-impLucky for me, our good friends at Fastback Custom Guitars here in Seattle had just released their vintage-inspired ’59 Zebras, a set of pickups that aim to replicate that vintage Gibson sound with a slight modern twist. Not only do they sound great, but they also look the part, making them a beautiful addition to the already flashy nature of this guitar. A definite upgrade, and you can read my review of these impressive pickups here.

Next on the docket was replacing that broken pickup selector switch. Truth be told, I would have replaced it anyway, as I have little confidence in plastic-backed Asian market devices, having broken plenty of them in my day. Yes, my heart truly belongs to Switchcraft, and their short model was just the thing I needed for this project. Solidly built and just the right size, the switch also has a satisfying amount of resistance when flipping from pickup to pickup. AllParts also chooses randomly which color of tip to send, so I definitely lucked out with the correct black.

Since we’re being honest, I should admit that I just don’t trust the electronics found in most Japanese-made guitars. I’m not saying that the stock parts are unusable, but knowing how hard I am on guitars it’s always a good idea for me to fully upgrade the wiring harness. Pots, switches, wiring – all of it goes. I used cloth wire, CTS 500K pots and a .022 Orange Drop cap.

If you’re at all familiar with this model, you’ll note that the two controls found on its chrome plate aren’t what you’d expect; instead of the usual vol/tone combo, what we have here is two controls acting as individual volumes for each pickup. A nice thought, but I’m the kind of guy that likes having a tone control and a good capacitor on hand. I set about wiring the guitar in the more familiar 1950s Gibson tradition, for which I always use a 1950’s wiring diagram, which allows the pickups and tone cap to work together more transparently.

Hardware

I didn’t go quite this far because a) I’m quite content with the bridge as-as and b) I’m only willing to indulge my obsessive-compulsive upgrades to a certain extent. Even so, the original bridge and hardware aren’t bad at all. In fact, they’re quite good.

The original tuners work brilliantly, but if I were in the market for replacements I’d be looking to my favorite brand Tone Pros. Their Kluson-style machines are made with higher quality materials than the originals, and are super authentic in look but precision-machined for modern reliability. Wonderful stuff, there.

As for the bridge, it’s a great unit that stays in tune nicely. I could see myself going for a Callaham bridge at some point, but I’m not necessarily looking for true vintage Strat tones, you know? Man, what I’d really like to do is pull the trem, fill the cavity and route the body for a Jazzmaster/Jaguar vibrato and a Mastery. I won’t, but that would be amazing.

Cosmetics

Flashy as she was, there were a few visual detractors that I couldn’t simply gloss over; I’m a picky guy, I guess.

For one, the original knobs were a good bit smaller than standard Jaguar knobs, and of course won’t fit on the US pots I dropped in the guitar, so they had to go. I ordered some genuine Fender replacement knobs, which looked very, very new when they arrived. Given that my guitar had been played hard and had tarnished hardware, it didn’t make aesthetic sense to have bright, shiny knobs on the control plate. So, I set about the task of lightly aging them to match, using Other Mike’s ’63 Jazz Bass as my template.

IMG_6652IMG_6650

Using my coarse-grit polishing pads I was able to de-gloss the knobs sufficiently, and after that I sprayed some lightly tinted clear coat on them to soften the look of the indicator. After dirtying them up a bit, I was left with knobs that had the perfect well-worn attire that belied their age.

The other eyesore about the guitar was that the previous owner had added a strap button on the upper bout, a common mod for these guitars. If you didn’t know, the Super-Sonic has its upper strap button on the neck plate, utilizing a longer anchor screw to accommodate the button itself. Some people really don’t like this – I didn’t at first! – but having gotten used to the way attaching the strap to the neck plate button shifts the guitar forward I couldn’t see myself using the other ever again. So, I set about filling in the hole and making it as invisible as possible.

IMG_6795I doweled the hole with some scrap wood we had laying around the shop, and after the glue was dry my aim was to create a perfectly-shaped surface for whatever new finish I would lay on top. Because the addition of the new strap button had chewed out some extra wood, I had to use wood putty to fill in the missing bits. Simple enough!

After allowing the putty to cure for a few days, I was stuck wondering exactly how I was going to recreate the look of blue sparkle finish in such a small area. If it were a solid color or even a burst, that would be a far easier task; laying down sparkles in a convincing way would be tricky, especially when it comes to the way the original finish reflected light…

Then an idea struck me: “What about glitter glue?”, I wondered to myself. Soon enough, I found myself on the hunt for the right shade of glitter at Michael’s, which was appropriate. I stumbled upon the Recollections brand and found exactly what I was looking for: Peacock Blue.

That’s a nice match, innit? It’s even better out of the bottle. Michael’s only carried the two smallest flake sizes in their stores, so the next one up would have been perfect. But hey, I nailed the color, so why complain?

It took a few days to get this right, honestly; laying down layer after layer of glue and waiting for it to reduce as it dried, never quite being able to predict how the flakes would lay. Very tedious. After I achieved the right about of sparkle density, I covered it up with super glue, which polished to a high gloss after it dried. I think it came out pretty well, considering. I mean, it’s not an exact match, but it’s pretty damn close. And now I don’t have an extra strap button hanging out, nor do I have to deal with an open wound on my beloved instrument.

I forgot to upload this shot in my initial post, but better late than never. Like I said, I'm super proud of this!

I forgot to upload this shot in my initial post, but better late than never.

Like I said, I’m really proud of how this turned out. Up close, you can definitely see the scar, but from a few paces away, the mind simply glosses over the offending spot, with the sparkly finish blending together in a pleasing way. Success!

The Final Product

Totally stoked.

Actually, I just noticed that the added strap button is still installed in this picture. I’ll replace it later. Grr/argh.

IMG_6642-imp

– MJA

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Fastback ’59 Zebras: Show Ponies or Thoroughbreds? (Also, Horse Jokes)

IMG_7380-imp

By Michael James Adams
Seattle-based hot-rod guitar company Fastback is Fastback at it again with their newly-released pickup set: The Fastback ’59 Zebras. Manufactured by hand with care, these pickups claim to be modeled after the fabled P.A.F. pickups found on our favorite vintage bursts, but do they live up to the hype? Let’s find out!

A Horse of a Different Color

The Fastback ’59 Zebra pickups are hand-wound at Fastback’s Seattle HQ and spec’d out like the original PAFs we’re all so fond of. Visually, this set couldn’t look more right; the cream bobbins are just the right color, neither looking too yellow or too brown as aged parts so often do. Customers can expect a choice between AlNiCo 2 and 5 magnets for different tonal variations, with the 2 magnets exhibiting softer, spongier highs and lows with round mids than their ‘three more’ counterparts. The pickups come with a heavy wax bath to combat microphonics – breaking with true vintage tradition to the joy of most people – and single braid wire for easy installation.

Our set was wound slightly hotter than the measurements listed on the website (not that I’m complaining!) with the bridge measuring in at 8.4K and the neck at 7.6K. Installation was a breeze, and within no time I was slinging hot licks all over the place. Or whatever people do with guitars these days.

With these pickups loaded into my recently-acquired ’97 Squier Vista Super-Sonic, the difference in sonic fidelity was immediately identifiable. Of course the Zebras were a marked improvement over the stock Korean ‘buckers, but being a guitar tech I’m no stranger to vintage PAFs and I must say I was impressed. Fastback’s really hit the nail on the head here, folks.

Black and White and Cred All Over

The neck pickup had all of the airy, vocal midrange I expected from a pickup claiming to be a PAF, but few of them ever really get all the way there. The lows were pronounced but not overbearing, and the highs were sweet and supple, with a warmth and body all their own. Clean or dirty, this pickup retained the clarity and note definition associated with classic units. With overdrive, I was enveloped in heavenly fat tone.* Really a superb pickup in every way.

The bridge unit absolutely blew me away; creamy, chunky drive that stayed tight enough to appease my modern sensibilities, but was in no way sterile or shrill. The midrange was warm yet distinct, bringing to mind my favorite Jimmy Page sounds from How the West Was Won. Highs were stinging but round, while the lows were well-defined and present, but not as much as one might expect given current “PAF” offerings. Let me explain:

IMG_7381-imp

Our test unit was 8.4K, slightly hotter than the one pictured above.

Though not as ample as I expected, the lows have a slightly different EQ curve, which seems to sacrifice some of the really round, fat low-lows in favor of a slightly higher bass frequency center, which means it never gets woofy or muddy. The E and A strings particularly had a very pleasant midrange kick, but were resplendent with a softer, woody overtone that immediately harkened back to the golden era of single-cut solid body guitars.

Again, the Jimmy Page comparison is apt here, because while his tone in HTWWW is freaking huge, I wouldn’t even begin to describe it as being as big and spectrum-killing as so many of our modern guitar ‘heroes’ might have you believe. No, Page’s tone is focused and cutting, neither overly bright or bassy. In a word, perfect – same as these pickups. I imagine the lows would be more pronounced in a more traditional mahogany body/maple top instrument, but I really dig the sound.

When used in tandem, these little beasts really come alive! The vocal qualities I mentioned earlier are magnified, with that quintessential open ‘ah’ vowel tone cutting through any dense mix. Literally anything I played with this selection sounded good, and that’s saying a lot. From legato minor-key runs to all-out, cacophonous freak out sessions, everything was gloriously tuneful.

I didn’t mention how well these pickups respond to tone knob variations. Even with a small twist from 10 to 8, the pickups warmed up beautifully, shifting the focus from brilliance to the woodier qualities we all associate with mahogany guitars. Thing is, this guitar isn’t mahogany, it’s basswood. Sure, the Super-Sonic isn’t the traditional guitar we’re all familiar with, but all of the warmth and lively sound I’d expect from a Les Paul was at my fingertips in a decidedly Fender package. Drop these pickups in a Les Paul, and I guarantee you’ll be thrilled.

Yay or Neigh?

Overall, I couldn’t be happier with these pickups. They’re every bit as magical as some of the original units I’ve played, with just a touch of modern wizardry thrown in. Too often, major pickup manufactures seem to be following in the current business model of most amp manufacturers, where doing absolutely everything comes before simplicity and good tone. We’re often left with amps that do everything averagely, with obscene amounts of high and low end which ultimately translates into a lackluster playing experience.

So you can understand why I really appreciate that Fastback has created a pickup that isn’t super hi-fi and doesn’t try to cover the breadth of the sonic spectrum. Instead of making a pickup that has huge amounts of earth-shattering low end and enough highs to blind a bat, it seems like Fastback tailor-made a set to suit full band situations with a focused, brilliant tone that cuts as much as it grooves. Undeniably fun, and easy on the wallet too!

Equine jokes.

Fastback ’59 Zebras
$80 each/$150 per set
Available direct or via Mike & Mike’s Guitar Bar

IMG_6641-imp

*Not to be confused with heavenly Fatone, which would be soooo dreamy

Tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
%d bloggers like this: