Tag Archives: offsetguitars

Mike Landis’ Very Special 1966 Jaguar: A Holiday Tale Spanning Two Decades

Happy Holidays from all of us at Mike & Mike’s Guitar Bar. We truly would be nothing if not for the love, support, and business of our many friends and customers. Cheers to you! In celebration of this joyous time, I’d like to tell you about something extraordinary that happened to me recently, something I couldn’t talk about because it would have spoiled a surprise.

fullsizerender

This 1966 Jaguar belongs to the father of my good friend Mike Landis, and it happens to be the very first offset guitar I ever encountered. I haven’t seen it in 20 years.

I vividly remember Mike pulling it out of the case on some otherwise average day in 1996. I’d never seen anything like it before—like something out of a Sci-Fi dream. The cold gleam of the Jaguar’s many control plates ignited within my young mind what felt like a fumbling musical adolescence; I didn’t know what I’d do with it if I had one, I just knew I needed it.

Sunglasses case, no less!

Sunglasses case, no less!

Holding that guitar for a brief moment two decades ago felt like some guilty, illicit pleasure. Everything inside me knew I shouldn’t have been messing with it, but the rush of getting caught made it all the more thrilling. I strummed a few chords, ignorant to the function of the switches, yet marveling at its beauty and quality of the sound I was hearing. It was clear to me then that I wasn’t worthy of such a guitar.

When Mike heard that I was coming back to my hometown of York, PA for a quick visit, he asked if I’d be able to get it back into playing shape as a Christmas gift for his dad. Of course I said yes!

That night as I stood over the guitar—the guitar—I paused for a moment before I dared touch it. I thought back to that first trespass, handling his dad’s Jaguar as if it were a priceless artifact, caught up in wonder and amazement. Surely, at that time, it had been the nicest instrument I had ever seen, let alone played. I wondered, was I worthy of it yet? I breathed, spoke aloud a quick thank you to any deity that may have been listening, and got to work. For two hours, I attended to it with the same thoughtful, careful attitude I try to lend to every instrument.

fullsizerender_1Before I arrived, Mike gave me a run-down of what the guitar might need. For starters, he wasn’t getting any sound out of the thing, and my first thought was that the Rhythm Circuit switch may have a bad solder joint. When I finally got my hands on it, the solder joints didn’t look obviously inoperable, but I thought it a safe bet to simply reflow a few key joints. This certainly helped, and suddenly I was getting sound from the Lead Circuit, with intermittent functionality of the RC.

It took a few minutes of turning the Rhythm volume and tone controls, but it turned out that those pots were just so dirty from disuse that they wouldn’t pass signal. Ideally, I’d have sprayed them out with contact cleaner, but alas, this was one thing I forgot to mention when I sent Mike my laundry list of tools I’d need to do the work. They cleaned up beautifully just by being turned over and over, and I told Mike to get some cleaner before too long.

Back in 1996, I remember asking why Mike’s dad never seemed to play the thing. The complaint then was that it just didn’t play all that great, and that was still a problem today. I don’t think the guitar had ever been set up, at least, not by someone that understands the intricacies of Fender Offset Guitars. Strung with too-light strings and with the bridge too high and saddles set at the wrong radius, it was clear that this guitar hadn’t been comfortable to play for ages.

fullsizerender_2I took the strings off, removed the bridge, and gave the guitar a thorough cleaning, from finish to frets. It wasn’t filthy by any means, but the frets showed signs of disuse and the finish had a dull shine. It’s Christmas, after all; this should feel like an entirely new guitar. After a good polish of the finish and frets, and some lemon oil for the rosewood fretboard, this guitar came right back to life.

I had Mike pick up a set of 11 gauge strings, which is usually the lightest I’ll recommend for Jaguars. I lowered and pre-radiused the saddles by eye and re-installed the bridge, intending to fine-tune it later on. To my surprise, the guitar actually played pretty well with just that done, but I decided to give the truss rod another quarter-turn to really dial in the relief. With 11s and the correct amount of neck angle, those strings weren’t going anywhere.

Because the guitar just wasn’t staying in tune before I started my work, I paid special attention to every point of contact on the strings, lubricating the nut and making sure it was properly cut for the gauge being used. Ideally, I’d like to replace the nut on this one at some point, but there just wasn’t time for that on this quick trip home. Another day, then! The trem was also wildly out of adjustment, so I zeroed in on the sweet spot for both the Trem Lock to work as intended and for optimum string tension, and the whole guitar snapped right back in to perfect functionality. Bam!

fullsizerender_3When I was finished, I hovered above the thing, not quite sure how to feel. This was the guitar from my youth that elicited such passion, though my ignorance kept me from fully embracing the model. I couldn’t believe that I was able to give back, as it were, to that first Jaguar. I dreamed about this shimmering blue guitar for years, and here I was, ready to play it as it should always have been. And play, I did; the sound, the feel, the response… it was magical.

Life has come full-circle, in a way. What an honor it was to care for this instrument! Thanks, Mike!

 

Tagged , , , , , , , , , , , , , , , , , ,

The Squier Vintage Modified Bass VI: a 100% Pun-Free Upgrade Guide

img_7827

My Squier VI lounging with Paul Frank’s amazing Custom Shop model, strung with Gabriel Tenorio strings

While Fender’s Jazzmaster and Jaguar seem more popular than ever, the Bass VI still seems mysterious, or at the very least, under-appreciated. Players seem confused by its mere presence in the catalog: Is it a bass? Is it a guitar? Is it a baritone?

Let’s clear up the confusion right now: The Bass VI is a bass guitar in the strictest sense. Tuned E to E a full octave lower than a standard guitar, the VI is an incredibly versatile instrument that’s as well-suited for familiar chord shapes as it is for punchy bass lines.

Right now, the easiest way to get into a VI is the Squier Vintage Modified model. Fundamentally a great instrument, the Squier VI ticks all of the right boxes for me: it has Jaguar-style pickups and the all-important fourth Bass Cut switch, it’s affordable, and it’s damn fun to play. We’re still talking about an import model, so if you pick one up and find it lacking, I’m here to provide a handy upgrade guide to the “ba-VI” of “VI-sessfully” upping your Squier’s “VI appeal” into a machine for making “mu-VI.” (My deepest apologies for how poorly those puns worked.)

The first mod I’m going to suggest can hardly be called a mod at all, but believe you me, it’s crucial.

STRINGS

Far and away, the most common complaint with current Bass VI models is that the low E string lacks tension. You’ll hear it described as “floppy” or “sloppy,” and those adjectives sum it up nicely. It feels unbalanced and just can’t stand up to aggressive picking.

The problem with your Bass VI’s low E is thanks to a too-light gauge of string. When Fender released the Bass VI in 1961, the standard set was made up of strings gauged .026”-.095”, and that .095” is key here. At some point in the recent past, the low E string changed to .084” which is woefully under-built for the task. A .095” E is going to feel taut, stable, and will gleefully accept heavy attack, whereas the lighter string ends up feeling, well, just as described in the paragraph above.

In my view, the most essential mod you can perform on your VI is installing a heavier, more balanced string set. Even without upgrading the bridge or swapping pickups, this very simple and easily overlooked tweak can tighten up the whole instrument and bring back the low end that’s so sorely missing with the stock strings.

Because this information doesn’t seem to be collected anywhere, here’s a handy shortlist of string makers that offer a good set of VI strings with adequately heavy E string, which I’ll update as I stumble upon them. The only set Fender currently offers is gauged .024″-.084″, sadly.

La Bella (Flats and Rounds)
Kalium (Rounds, tons of options)
Gabriel Tenorio String Company (Rounds and Gabriel’s new Ground Wounds)

Or, if you want a genuine set from the 1960s

BRIDGE

A '62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

An original ’62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

If you ever have a chance to inspect a vintage Bass VI, you’ll notice that the original bridge is much wider than the one found on most reissues, which is just a standard offset bridge slapped on likely due to the costs of tooling-up for such a niche item. That original 1” width is a big part of the Bass VI functionality puzzle, which translates to more flexibility when it comes to intonation. Original examples have nearly twice the saddle travel as the current part, and with the Bass VI’s 30” scale, every little bit is precious.

The stock Squier VI bridge

The stock Squier VI bridge

The bridge found on the Squier Bass VI is essentially the same as the other VM offsets, save for the adjustable Mustang-style saddles, which have deep grooves and the ability to set the radius of the strings to match the fretboard. It does, however, have a propensity to rattle around so much that even correct offset setup techniques may not quell it. (See my Demystifying series for more info)

What to do? Track down an original bridge from the 1960s or 1970s? Nah, Staytrem’s got you covered with their fantastic and appropriately wide Bass VI bridge. If you’re looking for a stable bridge that’ll intonate for sure, this is the way to go. I have a Mastery on my personal Squier, and while it does intonate perfectly for me, your mileage may vary depending on string gauge and type as well as setup.

TREM

img_8743As I mentioned in my recent article on the J.Mascis model, if you’re planning on using the vibrato you really should upgrade this part. Import vibratos are made of inferior metals and often have manufacturing flaws that render them less stable than their US-made counterparts.

A great solution here is obtaining a Fender AVRI/AV65 vibrato, especially if you’re on a budget. I’ve chosen the Mastery Vibrato for my own specifically because of the heavy-duty spring Mastery uses, which replicates the sturdier feel of early 1960s units and really stands up to the extra tension of those thick strings.

 

NUT

As you might expect, the nut work on these instruments is passable, but not great. The soft plastic used wears easily, and the slots are often too tight even for the string gauge used at the factory. I’ve also seen a number of them with poor string spacing, but hey, I don’t expect perfection on a sub-$500 instrument.

I highly recommend having the nut replaced by a competent tech in the material of your choice; my preference is bone. And for those of you that use the vibrato, a properly-cut nut is your best defense against tuning issues.

ELECTRONICS

The electronics in the Squier Vintage Modified series are, understandably, on the cheap side of things. I’ve seen and heard of a number of VMs that had wiring issues or faulty parts right out of the box, so if you’re going to be using this instrument heavily I would insist that you have the instrument rewired with higher quality pots, switches, capacitors, and even replace the jack while you’re at it. Not only will you end up with an instrument you can really trust, you’ll also have better sound as a result.

Look to CTS, Bourns, or my good friends at Emerson Custom for pots, Switchcraft for the jack and switches, and any number of options exist for capacitors. Most of these parts can be found via AllParts or Angela.

Note: US parts will require enlarged holes on the volume-tone control plate.


PICKUPS

While I confess that you can get by with the Squier in its stock configuration, let’s be honest: there are better pickups out there. They’re a little trebly, a bit noisy, and too weak on output to keep up with other basses. It’s well worth your time to explore the myriad pickup options that exist in today’s market, but where to start?

Star Trek stickers optional, of course

Star Trek stickers optional, of course

In my mind, Curtis Novak has his finger firmly on the pulse of offset guitars’ unique capabilities, and he’s the first person I bring up when a customer has a specific sound in their head. From traditional sounds to obscure designs stuffed into familiar covers, Curtis excels at wringing every last drop of tone from your instrument.

For Bass VI, he offers both the early ’61-’62 Jack Bruce-style pickups and the Jaguar-style pickups that came as standard on the model from 1962 onward. However, if you’re looking for something different, I’m sure Curtis could wind up a trio of his Jaguar-sized Lipsticks, some unique Gold Foils, or even something humbucking if you’re that kind.

Another good option would be the fantastic pickups made by our friend Jaime of At The Creamery. He offers a VI set with much higher output than the stock pickups, and with custom options if desired. Jaime does exceptional work!

On my personal VI, I started out by building a set out of three Fender AV65 Jaguar pickups, which I really like. They’re affordable and great-sounding pickups for the price, but ultimately, a little too bright for my tastes. If you need a good Tic-Tac sound, this would be a great way to go. If you create a set out of three separate pickups, do pay attention to output in each position as well as polarity to make sure they all play well together.

Currently, my VI is loaded with a set wound by our good friends a Lollar Pickups, which have a bump in midrange and output, and they really keep up with my other instruments no matter the setting. Plenty of bass on tap and clarity through any amp. I’m a huge fan of Lollar Pickups.

TUNERS

Prepare to be amazed: there’s no good reason to toss these. The Kluson-style tuners you find stock on the Squier VI are great. On the many examples I’ve had across my bench, I have never found them to be problematic. Keep them.

LINE VI

When Squier introduced their take on the VI, I was immediately excited. At the time, the VI wasn’t an instrument I was keen to spend a lot of money on, simply because I didn’t think I’d be using it heavily. Squier made that sound accessible and did so with a lot of bang for the buck. When you mod this instrument, it isn’t so much a lipstick-on-a-pig scenario, you’re genuinely taking a good instrument and making it better.

My VI and '73 Precision, just after we got back from tour.

My VI and ’73 Precision, just after we got back from tour.

To that point, I recently joined my good friends Vanessa and Sarah, a duo better known as Leo Leo. The LA-based contemplative rock-pop outfit plays complex, beautiful music that’s as energetic as it is challenging; they are one of my favorite bands. When they asked me to tour with them on bass, I have to admit that I was overjoyed and overwhelmed, especially with just a week to learn ten songs. It was a lot of work, but I’m so proud of the noise we made together at those shows.

At the center of my bass sound: my trusty Squier VI. I plugged into a borrowed Salvage Custom board (thank you, Gabriel!) populated with pedal necessities run through a mini SVT. Night after night, that thing performed beautifully and never let me down. Even as we rehearsed, it became clear that the VI was the sound. It proved to be such a bruiser that next time, I may leave my ’73 Precision Bass at home.

Each time I took it out of its case, I was immediately greeted with questions from perplexed onlookers that wondered about my weird bass. I showed it off proudly and handed it over to person after person, none of whom could believe what they were playing was a lowly Squier. There was only one occasion before a show where a churlish bassist chided me for playing––and I quote––a “piece of shit.”

I’m happy to say that I proved him wrong that night. I’m proud to play my Squier.

Here's how that Squier looked the day I recieved it. (Thanks, Nate!)

Here’s how that Squier looked the day I recieved it. (Thanks, Nate!) See below for a post-mod comparison.

This one's getting a TON of use in the @leoleoband set for the tour that starts—holy shit—tomorrow. Now, the weight of this Squier Bass VI never bothered me until we started this hours-long rehearsal process, but at the end of the night my back is screaming at me for relief. I think it may be time to look into a real '60s VI refin or something, that is of course assuming that the band wants to keep me! 😁 I also wish it were brightly-colored, but eh, such is life. Upgrades: -Lollar pickups -Fenderparts mint guard -Mastery Bridge + Vibrato (thanks Woody!) -upgraded wiring -La Bella Deep Talkin' Flats -Matching headstock #guitar #bass #bassvi #leoleo #tour #masatour #makeamericashakeagain #squier #fender #offsetguitars #lollarpickups #masterybridge #fenderparts

A post shared by Michael James Adams (@puisheen) on

Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,
%d bloggers like this: