Tag Archives: leo leo

REVIEW: Toothsome Tones from Yellowcake’s Furry Burrito

I’m a big fan of cake, let it be known far and wide. All kinds of cake, really: carrot cake, coffee cake, Devil’s Food, German Chocolate, the band Cake, ice cream cake, and especially Red Velvet, which seems to get a lot of hate and is often erroneously thought of as “just chocolate cake that is red.” This is a guitar blog, but I’m tempted to spend the rest of this article explaining exactly why that’s so, so wrong. It’s offensive, really.

For whatever reason, I’ve been in a yellow cake phase for well over a year. I mean, with so many flavors out there, why settle for boring old yellow? There’s just something about that buttery-sweet taste that’s arrested my tastebuds, I really can’t explain it. Except now that I think of it, this craving coincides with the arrival of one of the coolest pedals I’ve ever owned, one which has cemented its place in every incarnation of my guitar and bass rigs since: The Yellowcake Furry Burrito.

Maybe there’s a connection.

img_1827

All-Purpose Fuzz

The Yellowcake Furry Burrito is a fuzz pedal, but not just––the fuzz circuit cascades into an on-board overdrive, reminiscent of the old practice of “stacking” gain stages for maximum saturation, only here it’s in a single unit. In this way the Furry Burrito offers uniquely full-bodied sounds, mating a buttercream Muff-like fuzz and the midrange and clarity of a good overdrive. Even at its most boisterous settings, this pedal never loses definition and potency.

Four knobs adorn the pedal’s pastel enclosure: Gain, Drive, Filter, and Level. Gain and Drive control the amount of fuzz and drive, respectively. Taking turns with each knob shows off the pedal’s unique versatility: favoring the Drive knob gives way to the sweeter side of the Burrito, but Gain is where the decadent fuzz circuit resides. Mixing the two offers a near-endless variety of tones that blur the lines between the two famous effects.

The control labeled “Filter” is your basic variable low-pass which governs the amount of treble frequencies present. However, even at its most extreme settings the pedal retains its personality, never sounding too crystalline or mushy. If you prefer your amps dark like me, you’ll find that the Filter knob can act as a sort of fixer where other fuzz pedals may become too gummy. 

The FAT switch, as you might have guessed, is a two-position selector that offers a boost to the bottom. The ‘down’ position is the pedal’s vanilla setting, and while it’s certainly thinned out compared with the alternative choice, it is by no means washed out or icy. Engaging the switch caramelizes the low end into monstrous bass sounds and warm leads. This pedal loves low frequencies.

The real surprise here is the LED indicator, which doubles as a voltage trim pot. This lets you starve the circuit, introducing all of the sputtery, ripping goodness we all so enjoy in a good fuzz. This, combined with the two flavors of grit, makes the pedal singularly versatile.

Suggested Recipes

At its most polite settings this pedal won’t get you to clean boost territory. What you’re far more likely to find here is a robust drive with some RAT-like edge. What it lacks in subtlety, it more than makes up for in bold sounds as rendered here in my very first encounter with the pedal some sixty-six weeks prior to this post:

These Pinkerton-esque sounds were produced with Drive and Gain both set right around the mid-point into my Fender Excelsior Pro. With my old Jazzmaster, I was surprised by the nearly authentic “The Good Life” sounds that were coming out of it. You know me, all of my gear-tasting begins and ends with Weezer tunes.

The Furry Burrito positively blooms where more chaotic sounds are concerned. Rolling up the Gain and Drive knobs, the pedal becomes a sumptuous wall of thick fuzz, especially with the FAT switch in the ‘up’ position. The ample, peanut butter thick low end fluffs the signal without over overstepping the bounds of good taste (unless you wanted it to). Think Smashing Pumpkins and Dinosaur Jr.

It was this side of the Furry Burrito’s flavor profile that inspired my cover of “Silent Night,” which I recorded early in December of 2016. I ran the Yellowcake into a Strymon Bluesky set for a large hall verb, then ran the stereo signal to my ’65 Fender Bassman piggyback on one side and my ’79 Marshall JMP and mock 8×10” (4×12”) cabinet on the other. When the dirt kicks in at 57 seconds, what you’re hearing is the Yellowcake pedal, those amps, and my old Jazzmaster. I’m really proud of that sound. Have a listen:


Perfect Pairing

It’s also worth mentioning that the Furry Burrito pairs beautifully with other pedals.  When introduced in front of my old standard, the Smallsound/Bigsound FUCK Overdrive, the cascading effect of the creamy fuzz slamming into the FUCK, which added some sweetness and depth while the Furry Burrito happily drenched it in a gooey  ganache of fuzz. When used after my Z.Vex Fuzz Factory, I ended up with an even bigger, wider array of squishier tones. The pairing of the Factory and the Burrito also proved useful for added chaos at the very end of “Silent Night.” You can hear them together at the 1:46 mark, when I go behind the bridge for for the big finish.

This pedal is one of the rare few that’s as at-home on bass as with a guitar, especially with the voltage trimmer rolled back a bit. It also totally nails some of my favorite bass fuzz tones, including Beastie Boys‘ “Sabotage.”

Cooling Rack

img_5394

The Furry Burrito fits in perfectly with Kali’s color-coordinated rig

Having owned this pedal for so long, I should be able to tell you all about its strengths and its weaknesses, but it’s shockingly difficult to come up with criticism.

Yesterday, I showed the pedal off to my good friend Kali Kazoo, one of LA’s most unique and colorful songwriters. Touring the pedal’s various features and settings with Kali, I realized that the LED trimmer, while novel, is easily overlooked. There’s no visual “TURN ME” cue as you’d might expect, no overt declaration of its function. Being a clear, back-lit knob, I also wish for a contrasting indicator so settings are easier to recall. As it stands, my favorite setting for the trimmer is “turned to one side and then back a little bit.

Surely it’s not an exact measurement, but I often adjust according to taste anyway. As far as complaints go, that’s Angel’s Food. Cake jokes.

Have Your Yellowcake and Eat It Too

At $165 street, this pedal is a steal. If you’re on the market for a good, versatile fuzz that can do a lot more than just big, meaty sounds and keeps its composure, definitely keep this pedal in mind. If you find other popular fuzzes too capricious, the Furry Burrito would be an excellent option for you as well. Me, I can’t even think of leaving this pedal off of my board.  You know, I’m glad I don’t have to.

My board from the most recent LeoLeo tour.

My board from the most recent LeoLeo tour.

Tagged , , , , , , , , , , , , , , , , , ,

The Squier Vintage Modified Bass VI: a 100% Pun-Free Upgrade Guide

img_7827

My Squier VI lounging with Paul Frank’s amazing Custom Shop model, strung with Gabriel Tenorio strings

While Fender’s Jazzmaster and Jaguar seem more popular than ever, the Bass VI still seems mysterious, or at the very least, under-appreciated. Players seem confused by its mere presence in the catalog: Is it a bass? Is it a guitar? Is it a baritone?

Let’s clear up the confusion right now: The Bass VI is a bass guitar in the strictest sense. Tuned E to E a full octave lower than a standard guitar, the VI is an incredibly versatile instrument that’s as well-suited for familiar chord shapes as it is for punchy bass lines.

Right now, the easiest way to get into a VI is the Squier Vintage Modified model. Fundamentally a great instrument, the Squier VI ticks all of the right boxes for me: it has Jaguar-style pickups and the all-important fourth Bass Cut switch, it’s affordable, and it’s damn fun to play. We’re still talking about an import model, so if you pick one up and find it lacking, I’m here to provide a handy upgrade guide to the “ba-VI” of “VI-sessfully” upping your Squier’s “VI appeal” into a machine for making “mu-VI.” (My deepest apologies for how poorly those puns worked.)

The first mod I’m going to suggest can hardly be called a mod at all, but believe you me, it’s crucial.

STRINGS

Far and away, the most common complaint with current Bass VI models is that the low E string lacks tension. You’ll hear it described as “floppy” or “sloppy,” and those adjectives sum it up nicely. It feels unbalanced and just can’t stand up to aggressive picking.

The problem with your Bass VI’s low E is thanks to a too-light gauge of string. When Fender released the Bass VI in 1961, the standard set was made up of strings gauged .026”-.095”, and that .095” is key here. At some point in the recent past, the low E string changed to .084” which is woefully under-built for the task. A .095” E is going to feel taut, stable, and will gleefully accept heavy attack, whereas the lighter string ends up feeling, well, just as described in the paragraph above.

In my view, the most essential mod you can perform on your VI is installing a heavier, more balanced string set. Even without upgrading the bridge or swapping pickups, this very simple and easily overlooked tweak can tighten up the whole instrument and bring back the low end that’s so sorely missing with the stock strings.

Because this information doesn’t seem to be collected anywhere, here’s a handy shortlist of string makers that offer a good set of VI strings with adequately heavy E string, which I’ll update as I stumble upon them. The only set Fender currently offers is gauged .024″-.084″, sadly.

La Bella (Flats and Rounds)
Kalium (Rounds, tons of options)
Gabriel Tenorio String Company (Rounds and Gabriel’s new Ground Wounds)

Or, if you want a genuine set from the 1960s

BRIDGE

A '62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

An original ’62 Bass VI that I recently fell in love with at the Fretboard Journal Summit, courtesy of Gryphon Stringed Instruments

If you ever have a chance to inspect a vintage Bass VI, you’ll notice that the original bridge is much wider than the one found on most reissues, which is just a standard offset bridge slapped on likely due to the costs of tooling-up for such a niche item. That original 1” width is a big part of the Bass VI functionality puzzle, which translates to more flexibility when it comes to intonation. Original examples have nearly twice the saddle travel as the current part, and with the Bass VI’s 30” scale, every little bit is precious.

The stock Squier VI bridge

The stock Squier VI bridge

The bridge found on the Squier Bass VI is essentially the same as the other VM offsets, save for the adjustable Mustang-style saddles, which have deep grooves and the ability to set the radius of the strings to match the fretboard. It does, however, have a propensity to rattle around so much that even correct offset setup techniques may not quell it. (See my Demystifying series for more info)

What to do? Track down an original bridge from the 1960s or 1970s? Nah, Staytrem’s got you covered with their fantastic and appropriately wide Bass VI bridge. If you’re looking for a stable bridge that’ll intonate for sure, this is the way to go. I have a Mastery on my personal Squier, and while it does intonate perfectly for me, your mileage may vary depending on string gauge and type as well as setup.

TREM

img_8743As I mentioned in my recent article on the J.Mascis model, if you’re planning on using the vibrato you really should upgrade this part. Import vibratos are made of inferior metals and often have manufacturing flaws that render them less stable than their US-made counterparts.

A great solution here is obtaining a Fender AVRI/AV65 vibrato, especially if you’re on a budget. I’ve chosen the Mastery Vibrato for my own specifically because of the heavy-duty spring Mastery uses, which replicates the sturdier feel of early 1960s units and really stands up to the extra tension of those thick strings.

 

NUT

As you might expect, the nut work on these instruments is passable, but not great. The soft plastic used wears easily, and the slots are often too tight even for the string gauge used at the factory. I’ve also seen a number of them with poor string spacing, but hey, I don’t expect perfection on a sub-$500 instrument.

I highly recommend having the nut replaced by a competent tech in the material of your choice; my preference is bone. And for those of you that use the vibrato, a properly-cut nut is your best defense against tuning issues.

ELECTRONICS

The electronics in the Squier Vintage Modified series are, understandably, on the cheap side of things. I’ve seen and heard of a number of VMs that had wiring issues or faulty parts right out of the box, so if you’re going to be using this instrument heavily I would insist that you have the instrument rewired with higher quality pots, switches, capacitors, and even replace the jack while you’re at it. Not only will you end up with an instrument you can really trust, you’ll also have better sound as a result.

Look to CTS, Bourns, or my good friends at Emerson Custom for pots, Switchcraft for the jack and switches, and any number of options exist for capacitors. Most of these parts can be found via AllParts or Angela.

Note: US parts will require enlarged holes on the volume-tone control plate.


PICKUPS

While I confess that you can get by with the Squier in its stock configuration, let’s be honest: there are better pickups out there. They’re a little trebly, a bit noisy, and too weak on output to keep up with other basses. It’s well worth your time to explore the myriad pickup options that exist in today’s market, but where to start?

Star Trek stickers optional, of course

Star Trek stickers optional, of course

In my mind, Curtis Novak has his finger firmly on the pulse of offset guitars’ unique capabilities, and he’s the first person I bring up when a customer has a specific sound in their head. From traditional sounds to obscure designs stuffed into familiar covers, Curtis excels at wringing every last drop of tone from your instrument.

For Bass VI, he offers both the early ’61-’62 Jack Bruce-style pickups and the Jaguar-style pickups that came as standard on the model from 1962 onward. However, if you’re looking for something different, I’m sure Curtis could wind up a trio of his Jaguar-sized Lipsticks, some unique Gold Foils, or even something humbucking if you’re that kind.

Another good option would be the fantastic pickups made by our friend Jaime of At The Creamery. He offers a VI set with much higher output than the stock pickups, and with custom options if desired. Jaime does exceptional work!

On my personal VI, I started out by building a set out of three Fender AV65 Jaguar pickups, which I really like. They’re affordable and great-sounding pickups for the price, but ultimately, a little too bright for my tastes. If you need a good Tic-Tac sound, this would be a great way to go. If you create a set out of three separate pickups, do pay attention to output in each position as well as polarity to make sure they all play well together.

Currently, my VI is loaded with a set wound by our good friends a Lollar Pickups, which have a bump in midrange and output, and they really keep up with my other instruments no matter the setting. Plenty of bass on tap and clarity through any amp. I’m a huge fan of Lollar Pickups.

TUNERS

Prepare to be amazed: there’s no good reason to toss these. The Kluson-style tuners you find stock on the Squier VI are great. On the many examples I’ve had across my bench, I have never found them to be problematic. Keep them.

LINE VI

When Squier introduced their take on the VI, I was immediately excited. At the time, the VI wasn’t an instrument I was keen to spend a lot of money on, simply because I didn’t think I’d be using it heavily. Squier made that sound accessible and did so with a lot of bang for the buck. When you mod this instrument, it isn’t so much a lipstick-on-a-pig scenario, you’re genuinely taking a good instrument and making it better.

My VI and '73 Precision, just after we got back from tour.

My VI and ’73 Precision, just after we got back from tour.

To that point, I recently joined my good friends Vanessa and Sarah, a duo better known as Leo Leo. The LA-based contemplative rock-pop outfit plays complex, beautiful music that’s as energetic as it is challenging; they are one of my favorite bands. When they asked me to tour with them on bass, I have to admit that I was overjoyed and overwhelmed, especially with just a week to learn ten songs. It was a lot of work, but I’m so proud of the noise we made together at those shows.

At the center of my bass sound: my trusty Squier VI. I plugged into a borrowed Salvage Custom board (thank you, Gabriel!) populated with pedal necessities run through a mini SVT. Night after night, that thing performed beautifully and never let me down. Even as we rehearsed, it became clear that the VI was the sound. It proved to be such a bruiser that next time, I may leave my ’73 Precision Bass at home.

Each time I took it out of its case, I was immediately greeted with questions from perplexed onlookers that wondered about my weird bass. I showed it off proudly and handed it over to person after person, none of whom could believe what they were playing was a lowly Squier. There was only one occasion before a show where a churlish bassist chided me for playing––and I quote––a “piece of shit.”

I’m happy to say that I proved him wrong that night. I’m proud to play my Squier.

Here's how that Squier looked the day I recieved it. (Thanks, Nate!)

Here’s how that Squier looked the day I recieved it. (Thanks, Nate!) See below for a post-mod comparison.

This one's getting a TON of use in the @leoleoband set for the tour that starts—holy shit—tomorrow. Now, the weight of this Squier Bass VI never bothered me until we started this hours-long rehearsal process, but at the end of the night my back is screaming at me for relief. I think it may be time to look into a real '60s VI refin or something, that is of course assuming that the band wants to keep me! 😁 I also wish it were brightly-colored, but eh, such is life. Upgrades: -Lollar pickups -Fenderparts mint guard -Mastery Bridge + Vibrato (thanks Woody!) -upgraded wiring -La Bella Deep Talkin' Flats -Matching headstock #guitar #bass #bassvi #leoleo #tour #masatour #makeamericashakeagain #squier #fender #offsetguitars #lollarpickups #masterybridge #fenderparts

A post shared by Michael James Adams (@puisheen) on

Tagged , , , , , , , , , , , , , , , , , , , , , , , , ,
%d bloggers like this: